Programs developed by Schneider Electric
Zelio Soft is a free to use Zelio Logic configuration software. Main features: - Real programming using FBD (Functional Block Diagram) function block or contact language (LADDER). - Detection of any programming errors with its coherence test function. - Downloading and uploading of programmes. - Edition of personalised files. - Automatic compilation of programmes.
Simply smart, resulting from a study relating to ergonomics, TwidoSuite software has been developed to assist and simplify all your operations with the aim of significantly reducing development time. Open to numerous communication networks and flexible to support three base types - Compact, Modular and Extreme - and a wide range of I/O. Assures evolution of automation systems.
The tool provides automatic access to all free software updates and relevant information of Unity Pro & Vijeo Designer. Communication to serial devices through the ECC21 during firmware updates is not available. Communications should be restored automatically in most PowerLogic Systems.
Ecodial Advanced Calculation is an application that enables you to calculate and size electrical installation. This program helps you optimize the choice of equipment by sizing installations with several and different type of power supplies. You can also import rojects from ID-Spec Large and export to Rapsody.
Vijeo Designer™ HMI software handles design from the smallest applications for 3.8” terminals to the most demanding HMI applications of 15’’ industrial PCs. Its open architecture adapts to all Magelis XBT GT platforms, as well as to Magelis Smart & Compact iPCs. Ingenious, it offers web, multimedia and data exchange functions to transform your automated system into art!
My Ecodial L, your efficient assistant for electrical installation calculation. - My Ecodial L efficiently assists you in calculating complex electrical installations - My Ecodial L is your expert in electrical installation design and calculation - My Ecodial L is specialised in the calculation of your industrial and complex tertiary installations The Ecodial team has worked to improve...
CitectSCADA is an industrial control system that enables you to monitor a process. The program enables you to increase the return on your assets by delivering a highly scalable, reliable control and monitoring system. Its primary function is to collect information (data) and provide an interface to control specific equipment.
The Unity Pro PlantStruxure DTM Library contains the following Master DTMs and Generic DTMs for Unity Pro v7.0 or higher: PSx Ethernet RIO DTM (Version 1.2.22), Unity Pro Ethernet Configuration Tool (version 2.0.20), Unity Pro Generic Modbus DTM (version 1.1.10), Unity Pro Generic EthernetIP DTM (version 1.1.12).
TwidoSoft is a graphical development environment for creating, configuring and managing applications for Twido programmable controllers. Main features: - Programming in instruction list or ladder languages, reversible, Grafcet. - compatible with Windows 98SE & Windows 2000 & Windows XP. - Application browser with multiple window views aiding software configuration.
The SFT2841 program is the setting and operating tool for Sepam Series relays from the developer. It may be used with/without connecting the relay. In offline mode (without relay), it can be used to configure the different parameters of the hardware. The PC can then be connected directly to the relay for programming it. A dedicated PC can also be used for monitoring the hardware using a network.
Altivar Dtm Library is a free library that brings you support for various DTM devices. The program offers you information for the following DTM devices: - ATV61 (V 188.8.131.52) - ATV71 (V 184.108.40.206) - ATV LIFT(V 220.127.116.11) - ATV212(V 18.104.22.168) - ATV12 (V 22.214.171.124) - ATV31/312 (V 126.96.36.199) - ATV32 (V 188.8.131.52).
This application represents a package of several DTMs. It includes the following installers: ATS22 DTM Installer, Altistart DTM Library Installer and ATS48 DTM Installer. This utility gives you the ability to modify or remove the installers or the entire library.
SoMove is a user-friendly setup software for Windows, which allows you to set up Schneider Electric motor control devices. SoMove software incorporates various functions for the device setup phases, such as: configuration preparation, setup, and maintenance.
Advantys STB configuration software does more than simply allow you to design a system, it is a powerful tool that assists you through every phase of the product lifecycle, from product selection all the way to system maintenance and diagnostics. Main features: - Initiate system commissioning without a Fieldbus master.
SoMachine is a program for developing, configuring, and commissioning the entire machine. You can replace a controller with another one, while retaining the logic and the configuration. Several versions of SoMachine can run in parallel in a system to help ensure compatibility.
SoMove is apowerful program designed for setting up Schneider Electric motor control devices. It incorporates numerous useful functions for the device setup phases- Design, Commissioning and Maintenance. It allows the preparation of configuration files, file management and storage, and print-out of the list of parameters.
TM5-7 DTM Library is a program that allows Modicon TM5 (IP 20) and Modicon TM7 (IP 67) distributed I/O islands to be integrated on the CANopen bus using the "Performance distributed I/O configuration software" for external automation applications. The program has support for a variety of IO modules.
Curve direct is a software intended for all people seeking to view the behavior of automatic breaking devices placed in cascade in a LV electrical network. Curve direct is used to view coordination between devices. This tool therefore enhances the level of continuity of service of an installation.
PowerLogic ION Setup is a user friendly configuration tool that provides an intuitive environment for setting up and verifying settings on PowerLogic meters and other devices. ION Setup is mainly used for configuring advanced features of the meter or for setting up a meter that does not have a front panel or remote display.
DS ControlPoint is a program that allows users to operate a combination of analog and IP cameras and encoders through a single interface. DS ControlPoint operates any single system or combination of DX4100, DX4500, DX4600, DX4700/4800, DX8000, DX8100 Series DVRs as well as DS HVRs and DS NVs servers enabling seamless migration from analog to IP environments.